Mindterm Settings This document lists the different configuration options one may set to configure MindTerm. Settings can be specified on the command-line, stored in a per host file (~/mindterm/HOST.mtp) or specified in the html code used to launch the applet. Common connection settings protocol Preferred protocol (auto/ssh1/ssh2) server Name of server to connect to port Port on server to connect to real-server Real address of sshd if it is behind a firewall local-bind Default local address to bind to for forwards username Username to login as password Password for normal authentication (only saved if save passwords checked) passphrase Passphrase for publickey keypair file (only saved if save passwords checked) proxy-type Type of proxy server to connect through (none/http/socks4/socks5) proxy-host Name of proxy server to connect through proxy-port Port on proxy server to connect through proxy-user Username if authentication on proxy server proxy-password Password if authentication on proxy server ssh1-cipher Name of block cipher to use in ssh1 (blowfish-cbc/3des-cbc/idea-cbc) auth-method Method of authentication, either single or comma-separated list (password/publickey/tis/ secureid/cryptocard/keyboard-interactive) private-key Name of file containing private key publickey authentication display Local X11 display definition (i.e. :) compression Compression Level (0 means none, 1=fast, 9=slow/best) x11-forward Indicates whether X11 display is forwarded or not x11-display Local display to forward force-pty Indicates whether to allocate a pty or not sftpbridge-host Interface to listen on in ftp to sftp bridge (empty if disabled) sftpbridge-port Port to listen on in ftp to sftp bridge strict-hostid Strict host key check, can only connect to known hosts mtu Max packet size key-timing-noise Add noise when sending passwords to increase security SSH2 specific settings kex-algorithms Kex algorithms to use in preferred order (diffie-hellman-group1-sha1, diffie-hellman-group-exchange-sha1) server-host-key-algorithms Host key algorithms to accept in preferred order (ssh-rsa, ssh-dss) enc-algorithms-cli2srv Encryption algorithms client to server enc-algorithms-srv2cli Encryption algorithms server to client mac-algorithms-cli2srv Mac algorithms client to server mac-algorithms-srv2cli Mac algorithms server to client comp-algorithms-cli2srv Compression algorithms client to server (none, zlib) comp-algorithms-srv2cli Compression algorithms server to client (none, zlib) package-version Package version to send to server in protocol version exchange alive Connection keep-alive interval in seconds (0 means no keepalive packets are sent) filelist-remote-command Remote command to list files supported ciphers: aes128-cbc, blowfish-cbc, twofish128-cbc, aes192-cbc, aes256-cbc, twofish-cbc, cast128-cbc, 3des-cbc, idea-cbc, arcfour supported macs: hmac-md5, hmac-sha1, hmac-sha1-96, hmac-md5-96, hmac-ripemd160 Terminal window settings rev-video Reverse video in terminal autowrap Auto wrapping of line if output reaches edge of window rev-autowrap Reverse autowrap when going off left edge of window insert-mode Toggles insert mode auto-linefeed Do auto-linefeed repos-input Reposition scroll-area to bottom on keyboard input repos-output Reposition scroll-area to bottom on output to screen visible-cursor Toggles if cursor is visible or not local-echo Do local echo visual-bell Toggles if audible or visual bell will be used map-ctrl-space Map + to (e.g. for emacs) 80x132-toggle Toggle 80/132 columns 80x132-enable Enable 80/132 toggling local-pgkeys Use PgUp, PgDn, Home, End keys for local scroll or escape them copy-crnl Put instead of at end of lines in copy/paste ascii-line Use ASCII Line-draw-characters instead of drawing copy-select Copy directly on mouse-selection font-name Name of font to use in terminal font-size Size of font to use in terminal geometry Geometry of terminal ('x') term-type Name of terminal to emulate (xterm, linux, scoansi, att6386, sun, aixterm, vt220, vt100, ansi, vt52, xterm-color, linux-lat, at386, vt320, vt102) save-lines Number of lines to save in scrollback buffer scrollbar Scrollbar position (none/left/right) bg-color Background color ( or ',,') fg-color Foreground color ( or ',,') cursor-color Cursor color ( or ',,') (name of colors are: black, red, green, yellow, blue, magenta, cyan, white, i_black, i_red, i_green, i_yellow, i_blue, i_magenta, i_cyan, i_white) resize-gravity Resize gravity, fixpoint of screen when resizing (top/bottom) backspace-send Character to send on BACKSPACE (BS/DEL) delete-send Character to send on DELETE (BS/DEL) select-delim Delimiter characters for click-selection ("") paste-button Mouse button for paste, (shift+left/middle/right) input-charset Character set to assume input is in. Currently the only supported name here is 'vga'. The default value is 'none' which means use the system default. line-space-delta Number of pixels to modify the line spacing with. SFTP Module settings module.sftp.cwd-local Local start directory module.sftp.cwd-remote Remote start directory SCP Module settings module.scp.cwd-local Local start directory module.scp.cwd-remote Remote start directory