CARMA Real Time Software breakdown by developer
CARMA Real Time Software breakdown by developer
Marc Pound/Steve Scott
May 23, 2006
Version 1.11
updated: 07/10/2006
ANDY (11 priority 1, 8 priority 2)
-
Pipeline Tsys (1-Andy) DONE
-
Channel average definition (*1-Andy)
-
Pipeline ChannelAverage (1-Andy)
-
Pipeline Flux (1-Andy)
-
Pipeline Band phase offsets (1-Andy)
-
Integration of downconverter spectral modes (1-Andy)
-
2nd LO counter (1-Andy) DONE
-
2nd LO Control (1-Andy)
-
1mm rx - integration of HW and checkout (1-Andy)
-
Maintenance and bug fixes (1-Everybody)
-
CANBUS API update (1-Andy)
-
Software Release R5.5 (2-All)
-
PAM levels for load/calibration (2-Andy/Colby)
-
Optical centroiding(2-Andy)
-
Optics (2-Andy)
-
RTD OVRO Gunn (2-Andy)
-
Master Clock reorganization (2-Andy)
-
Drive upgrade (2-Andy)
-
Correlator spectral line integration (2-Andy/Tom/Steve)
TOM (7 priority 1, 7 priority 2)
-
Change interfaces to use CARMA antennas numbers (1-Tom/Steve) DONE
-
RTD of subarray ant assignment (1-Tom) DONE
-
Fault system - basic, simple DAG (1-Tom) DONE
-
Display of root faults (1-Tom) DONE
-
Sync IPQ reads to VM pages(1-Tom)
-
Maintenance and bug fixes (1-Everybody)
-
Fault system - bigger DAG (1-Tom)
-
Software Release R5.5 (2-All)
-
Signal mapping (2-Tom) Full support of arbitrary hw setup
-
Change correlator config states & wait to complete (2-Tom)
-
Fault system control (cmds to ignore components, wildcards, etc) (2-Tom)
-
Wait on logical combinations of criteria (2-Tom)
-
Saving/restoring subarray controller state(*2-Tom)
-
Correlator spectral line integration (2-Andy/Tom/Steve)
STEVE (6 priority 1, 5 priority 2)
-
Change interfaces to use CARMA antennas numbers (1-Tom/Steve) DONE
-
Analyze synchronization logs to see how many are dropped (1-Steve) DONE
-
RTD Multi-cell multi-trace plotter (1-Steve)
-
Modify OVRO stow position to avoid Cloudsat (1-Steve) DONE
-
Maintenance and bug fixes (1-Everybody)
-
Lobe rotator API update (1-Steve) DONE
-
Software Release R5.5 (2-All)
-
RTD two cell scatter plot (2-Steve)
-
Radio pointing peakup (2-Steve)
-
Correlator spectral line integration (2-Andy/Tom/Steve)
-
Python wrappers (2-Steve)
RICK (8 priority 1, 3 priority 2)
-
Visbricks named by starting frame count (1-Rick)
-
Visbricks renamed to '.done' after they are complete (1-Rick)
-
Integration of correlator spectral modes (1-Rick)
-
New correlator subsystem, rename and resize existing one (**1-Rick)
-
Internet link to CIT (1-Rick) DONE
-
Local disks on database computer (1-Rick) DONE DONE
-
Maintenance and bug fixes (1-Everybody)
-
Move pipeline tasks to its own computer with local disks (1-Rick)
-
Software Release R5.5 (2-All)
-
Backup internet link from Cedar Flat (2-Rick)
-
Integration of remote power cycling for antennas (2-Rick)
COLBY (5 priority 1, 17 priority 2)
-
Drive stalls (1-Colby) DONE
-
Phase monitor, hat creek mode (1-Colby) DONE
-
Sequence numbers (1-Colby) DONE
-
Modify BIMA stow position to avoid Cloudsat (1-Colby) DONE
-
Maintenance and bug fixes (1-Everybody)
-
Software Release R5.5 (2-All)
-
RTD Phase Monitor (2-Colby) DONE
-
RTD Bima rx table (2-Colby)
-
RTD BIMA Telemetry (2-Colby) Is a separate RTD window really needed?
-
Phase monitor, integrated with carma (2-Colby) DONE
-
Deal with wrap differences and antenna types (*2-Colby)
-
Tuning synchronization(*2-Colby)
-
Sideband ratio measurement (2-Colby)
-
Dewar temperature regulation (2-Colby)
-
Phaseswitching (2-Colby) Flexible assignment of phaseswitching patterns
-
PAM levels for load/calibration (2-Andy/Colby)
-
Add multi-type/multi-vars to canpacket (2-Colby)
-
Install of new lab computer in berkeley 444 lab (2-Colby)
-
Weather prediction for CF (2-Colby)
-
Trap ascii packets and version information from telem card (2-Colby)
-
Report telemetry status (2-Colby)
-
Alarm control (2-Colby)
DAVE (3 priority 1, 4 priority 2)
-
SAC startup sym links(**1-Dave) DONE
-
Maintenance and bug fixes (1-Everybody)
-
Linelength system (1-Dave, hardware dependent)
-
Libtool for carma build system (2-Dave)
-
Software Release R5.5 (2-All)
-
Central IF (2-Dave)
-
Anti-Collision (2-Dave)
PETER (6 priority 1, 5 Priority 2)
-
Baseline & antenna-based visibilities (**1-Peter)
-
Weather station time interval (1-Peter)
-
Bima focus tables (1-Peter)
-
Optical pointing - writing of coeffs in C++ (1-Peter)
-
DPS integration (1-Peter) DONE
-
Maintenance and bug fixes (1-Everybody)
-
Software Release R5.5 (2-All)
-
Ephemeris handling of fixed sources (2-Peter)
-
Tsys measurement (**2-Peter)
-
MIRIAD support (2-Peter)
-
Optical pointing using centroiding results (2-Peter)
MARC (7 priority 1, 10 priority 2)
-
Get all control parameters into monitor system (1-Marc) DONE
-
Monitor point reorg, command segregation (1-Marc) DONE
-
Automatic build of Windows executable (1-Marc) DONE
-
Composite window with subarray tabs, proj baselines (1-Marc)
-
Sexagesimal for RA/dec(1-Marc) DONE
-
Maintenance and bug fixes (1-Everybody)
-
UVW interpolation (1-Marc) DONE
-
Implement/Test Lobe rotator/Delay API simplification (2-Marc) DONE
-
RTD Antenna/Pad offset (maybe put in composite) (2-Marc)
-
Software Release R5.5 (2-All)
-
fixed (terrestrial) source command (2-Marc)
-
logBrowser (2-Marc)
-
Observers can enter comments directly into log (2-Marc)
-
Add downconverter amplifier control to noise command (2-Marc)
-
Observing block monitor points (*2-Marc)
-
Observing block implementation (*2-Marc)
-
Restore azel offset to those that were in place before
previous track cmd (2-Marc)
- have track command zero out azel offsets to all antennas (2-Marc)