A Summary of the International Standard Date and Time Notation

International Standard ISO 8601 specifies numeric representations of date and time. This standard notation helps to avoid confusion in international communication caused by the many different national notations and increases the portability of computer user interfaces. In addition, these formats have several important advantages for computer usage compared to other traditional date and time notations. The time notation described here is already the de-facto standard in almost all countries and the date notation is becoming increasingly popular.

Especially software engineers who design user interfaces, file formats, and communication protocols should be familiar with ISO 8601.

Contents: Date, Time of Day, Time Zone.

Date

The international standard date notation is

YYYY-MM-DD

where YYYY is the year in the usual Gregorian calendar, MM is the month of the year between 01 (January) and 12 (December), and DD is the day of the month between 01 and 31.

For example, the fourth day of February in the year 1995 is written in the standard notation as

1995-02-04

Other commonly used notations are e.g. 2/4/95, 4/2/95, 95/2/4, 4.2.1995, 04-FEB-1995, 4-February-1995, and many more. Especially the first two examples are dangerous, because as both are used quite often in the USA and in Great Britain and both can not be distinguished, it is unclear whether 2/4/95 means 1995-04-02 or 1995-02-04. The date notation 2/4/5 has at least six reasonable interpretations (assuming that only the twentieth and twenty-first century are reasonable candidates in our live time).

Advantages of the ISO 8601 standard date notation compared to other commonly used variants:

As dates will look a little bit strange anyway starting with 2000-01-01 (e.g. like 1/1/0), it has been suggested that the year 2000 is an excellent opportunity to change to the standard date notation.

Apart from the recommended primary standard notation YYYY-MM-DD, ISO 8601 also specifies a number of alternative formats for use in applications with special requirements. All of these alternatives can easily and automatically be distinguished from each other:

The hyphens can be omitted if compactness of the representation is more important than human readability, for example as in

19950204

For situations where information about the century is really not required, a 2-digit year representation is available:

95-02-04 or 950204

If only the month or even only the year is of interest:

1995-02 or 1995

In commercial and industrial applications (delivery times, production plans, etc.), especially in Europe, it is often required to refer to a week of a year. Week 01 of a year is per definition the first week which has the Thursday in this year, which is equivalent to the week which contains the fourth day of January. In other words, the first week of a new year is the week which has the majority of its days in the new year. Week 01 might also contain days from the previous year and the week before week 01 of a year is the last week (52 or 53) of the previous year even if it contains days from the new year. A week starts with Monday (day 1) and ends with Sunday (day 7). For example, the first week of the year 1997 lasts from 1996-12-30 to 1997-01-05 and can be written in standard notation as

1997-W01 or 1997W01

The week notation can also be extended by a number indicating the day of the week. For example the day 1996-12-31 which is the Tuesday (day 2) of the first week of 1997 can also be written as

1997-W01-2 or 1997W012

for applications like industrial planning where many things like shift rotations are organized per week and knowing the week number and the day of the week is more handy than knowing the day of the month.

An abbreviated version of the year and week number like

95W05

is sometimes useful as a compact code printed on a product that indicates when it has been manufactured.

The ISO standard avoids explicitly stating the possible range of week numbers, but this can easily be deduced from the definition:

Theorem: Possible week numbers are in the range 01 to 53. A year always has a week 52.

Proof: Per definition, the first week of a year is W01 and consequently days before week W01 belong to the previous year and so there is no week with lower numbers. Considering the highest possible week number, the worst case is a leap year like 1976 that starts with a Thursday, because this keeps the highest possible number of days of W01 in the previous year, i.e. 3 days. In this case, the Sunday of W52 of the worst case year is day number 4+51*7=361 and 361-366=5 days of W53 belong still to this year which guarantees that in the worst case year day 4 (Thursday) of W53 is not yet in the next year, so a week number 53 is possible. For example, the 53 weeks of the worst case year 1976 started with 1975-12-29 = 1976-W01-1 and ended with 1977-01-02 = 1976-W53-7. On the other hand, considering the lowest number of the last week of a year, the worst case is a non-leap year like 1999 that starts with a Friday, which ensures that the first three days of the year belong to the last week of the previous year. In this case, the Sunday of week 52 would be day number 3+52*7=367, i.e. only the last 367-365=2 days of the W52 reach into the next year and consequently, even a worst case year like 1999 has a week W52 including the days 1999-12-27 to 2000-01-02. q.e.d.

[Unfortunately, the current version of the C programming language standard provides in the strftime() function no means to generate the ISO 8601 week notation. A required extension would be four new formatting codes: for the year of the week to which the specified day belongs (both 2-digit and 4-digit), for the number of the week between 01 and 53, and for the day of the week between 1 (Monday) and 7 (Sunday). Another trivial mistake in the description of strftime() in the C standard is that the range of seconds goes from 00 to 61, because at one time only one single leap second 60 can be inserted into UTC and consequently there will never be a leap second 61.]

Both day and year are useful units of structuring time, because the position of the sun on the sky, which influences our lives, is described by them. However the 12 months of a year are of some obscure mystic origin and have no real purpose today except that people are used to having them (they do not even describe the current position of the moon). In some applications, a date notation is prefered which uses only the year and the day of the year between 001 and 365 (366 in leap years). The standard notation for this variant representing the day 1995-02-04 (that is day 035 of the year 1995) is

1995-035 or 1995035

Leap years are years with an additional day YYYY-02-29, where the year number is a multiple of four with the following exception: If a year is a multiple of 100, then it is only a leap year if it is also a multiple of 400. For example, 1900 was not a leap year, but 2000 is one.

Time of Day

The international standard notation for the time of day is

hh:mm:ss

where hh is the number of complete hours that have passed since midnight (00-24), mm is the number of complete minutes that have passed since the start of the hour (00-59), and ss is the number of seconds since the start of the minute (00-60). The value 60 for ss appears only in case of an inserted leap second into an atomic time scale like UTC in order to keep it synchronized with a less constant astronomical time scale like UT1. The hour value 24 is only possible when the minute and second values are zero. An example time is

23:59:59

which represents the time one second before midnight.

As with the date notation, the separating colons can also be omitted as in

235959

and the precision can be reduced by omitting the seconds or both the seconds and minutes as in

23:59, 2359, or 23

It is also possible to add fractions of a second after a decimal dot, e.g. the time 5.8 ms before midnight can be written as

23:59:59.9942 or 235959.9942

As every day both starts and ends with midnight, the two notations 00:00 and 24:00 are available to distinguish the two midnights which can be associated with one date. This means that the following two strings refer to exactly the same point in time:

1995-02-04 24:00 = 1995-02-05 00:00

In case an unambiguous representation of time is required, 00:00 is usually the prefered notation for midnight, which is also what most digital clocks display.

A remark for readers from the US:

The 24h time notation specified here has already been the de-facto standard all over the world in written language for decades, except in some English speaking countries where still a notation with hours between 1 and 12 and additions like "a.m." and "p.m." is in wide use. The common 24h international standard notation starts to get widely used now even in England. Other languages than English don't even have abbreviations like "a.m." and "p.m." and the 12h notation is certainly hardly ever used on Continental Europe to write or display a time. The old English 12h notation has many disadvantages like

The 12h time is simply a relic from the dark ages when Roman numerals were used, the number zero had not yet been invented and analog clocks where the only known form of displaying a time. Please avoid using it, especially in technical applications! Even in the US, the widely respected Chicago Manual of Style recommends now to use the international standard time notation in publications.

Time Zone

Without any further additions, a date and time as written above is assumed to be in some local time zone. In order to indicate that a time is measured in Universal Time (UTC), you can append a capital letter Z to a time as in

23:59:59Z or 2359Z

[The Z stands for the "zero meridian" which goes through Greenwich in London and is also commonly used in radio communication where it is pronounced "Zulu" (the word for Z in the NATO radio alphabet). Universal Time (sometimes also called "Zulu Time") was called Greenwich Mean Time (GMT) before 1972, however this term should no longer be used. Since the introduction of an international atomic time scale, almost all existing civil time zones are now related to UTC which is slightly different from the old and now unused GMT.]

The strings

+hh:mm, +hhmm, or +hh

can be added to the time to indicate that the used local time zone is hh hours and mm minutes ahead of UTC. For time zones west of the zero meridian, which are behind UTC, the notation

-hh:mm, -hhmm, or -hh

is used instead. For example, Middle European Time (MET) is +0100 and US/Canadian Eastern Standard Time (EST) is -0500. The following strings all indicate the same point of time:

12:00Z = 13:00+01:00 = 0700-0500

There exists no international standard which specifies abbreviations for civil time zones like MET, EST, etc. and sometimes the same abbreviation is even used for two very different time zones. In addition, politicians enjoy modifying the rules for civil time zones, especially for daylight saving times, every few years, so the only really reliable way of describing a local time zone is to specify numerically the difference of local time to UTC. Better use directly UTC as your only time zone where this is possible and then you have not to worry about time zones and daylight saving time changes at all.


This was a brief overview of the ISO 8601 standard that covers only the most useful notations and includes some additional related information. The full standard defines in addition a number of more exotic notations including some for periods of time. The ISO 8601 document is unfortunately not available online and interested people will have to order a paper copy from

International Organization for Standardization
Case postale 56
1, rue de Varembé
CH-1211 Genève 20
Switzerland

phone: +41 22 749 01 11
fax: +41 22 733 34 30
e-mail: sales@isocs.iso.ch

A more detailed online summary of ISO 8601 than this one is the text ISO 8601:1988 Date/Time Representations available from ftp.informatik.uni-erlangen.de:pub/doc/ISO/ISO8601.ps.Z (PostScript, 16 kb, 5 pages) written by Gary Houston, which is now also available in HTML.


I wish to thank Edward M. Reingold for developing the fine GNU Emacs calendar functions, as well as Rich Wales, Mark Brader, and others in the comp.std.internat USENET discussion group for valuable comments about this document. Further comments and hyperlinks to this text are welcome.

Markus Kuhn <mskuhn@cip.informatik.uni-erlangen.de>, 1996-01-13