ADMIT Output for rsr.33551.blanking.sum.admit


Tasks listed in ID number order - click on task name to see its outputs. Colors and icons indicate the status of each task:
 Task ran normally (Green)  |   Task needs to be re-run (Orange)  |   Task is disabled (Pink) |   Task has crashed (Red)

Flow Diagram for rsr.33551.blanking.sum.admit

This diagram is a directed acyclic graph representing the ADMIT Task connections for the flow. Each arrow represents the connection from an ADMIT task output to the input of another ADMIT Task. The integer next to each arrow is the zero-based index of the ADMIT Task's output BDP. Note any output BDP may be used as the input for more than one ADMIT Task.

ADMIT Flow Diagram
GenerateSpectrum_AT (taskid=0)     contin=0.000000 freq=115.271202 delta=0.000500 nspectra=1.000000 nchan = 1297

GenerateSpectrum_AT creates synthetic spectra with noise.


GenerateSpectrum_AT output

Generated Spectrum 0
Generated Spectrum 0
LineSegment_AT (taskid=1)     numsigma=5.0 minchan=4 maxgap=3 csub=[0, None] iterate=True

LineSegment_AT identifies regions in one or more spectrum that have contiguous emission above a user specified noise floor. The input spectra are CubeSpectrum_AT or CubeStats_AT.



Line Segments

frequencyuidformulanametransitionvelocityElEulinestrengthpeakintensitypeakoffsetfwhmstartchanendchanpeakrmsblendforce
[GHz][][][][][km/s][K][K][D^2][Jy/beam][km/s][km/s][][][][][]
1.105E+02 U_110.516 NotIdentified Not Identified 0.000E+00 0.000E+00 0.000E+00 0.000E+00 4.591E-02 0.000E+00 2.203E+02 1.239E+03 1.244E+03 6.145E+01 0.000E+00 False
Detected line segments from input spectrum #0.
Detected line segments from input spectrum #0.
Identified segments overlaid on Signal/Noise plot of all spectra.
Identified segments overlaid on Signal/Noise plot of all spectra.
LineID_AT (taskid=2)     vlsr=12387 numsigma=5.0 minchan=4 maxgap=3 csub=[0, None] iterate=True tier1width=0.0 identifylines=True recomb=shallow

LineID_AT identifies spectral lines in an input datacube, using either one or more input spectra from CubeSpectrum_AT or CubeStats_AT.


Identified Spectral Lines

Identified Spectral Lines

frequencyuidformulanametransitionvelocityElEulinestrengthpeakintensitypeakoffsetfwhmstartchanendchanpeakrmsblendforce
[GHz][][][][][km/s][K][K][D^2][Jy/beam][km/s][km/s][][][][][]
1.153E+02 CO_115.27120 CO Carbon Monoxide 1-0 1.237E+04 0.000E+00 5.532E+00 1.212E-02 4.591E-02 -2.055E+01 1.177E+01 1.239E+03 1.243E+03 6.145E+01 0.000E+00 False
Identified lines overlaid on input spectrum #0.
Identified lines overlaid on input spectrum #0.
Identified lines overlaid on Signal/Noise plot of all spectra.
Identified lines overlaid on Signal/Noise plot of all spectra.