INFO : AT.py : Setting {'seed': -1, 'file': 'rsr.92068.blanking.sum.txt'} for GenerateSpectrum_AT
INFO : AT.py : Setting 'csub' = [0, None] for LineSegment_AT
INFO : AT.py : Setting 'csub' = [0, None] for LineID_AT
INFO : AT.py : Setting 'vlsr' = 12387.0 for LineID_AT
INFO : AT.py : Setting 'references' = etc/co_lines.list for LineID_AT
INFO : Admit.py : ADMIT run() called [flowcount 1]
INFO :
INFO :
INFO : Executing GenerateSpectrum_AT - '' (V1.0.0)
INFO :
INFO :
INFO : Run using the following settings:
INFO : nchan : 1000
INFO : file : rsr.92068.blanking.sum.txt
INFO : lines : []
INFO : hanning : False
INFO : nspectra : 1
INFO : contin : 0.0
INFO : delta : 0.5
INFO : freq : 115.2712018
INFO : transitions : []
INFO : seed : -1
INFO :
TIMING : CubeSpectrum ADMIT [ 1.89662500e+00 1.64394024e+09]
TIMING : CubeSpectrum BEGIN [ 0. 0.]
INFO : utils.py : OSTYPE: linux
TIMING : CubeSpectrum start [ 2.40810000e-02 2.41250992e-02 1.40744922e+03 2.08652344e+02]
TIMING : CubeSpectrum getspec [ 8.13170000e-02 8.15019608e-02 1.40744922e+03 2.08746094e+02]
TIMING : CubeSpectrum open [ 1.19310000e-02 1.19600296e-02 1.40744922e+03 2.08746094e+02]
TIMING : CubeSpectrum table [ 2.11506000e-01 2.31862068e-01 1.42675391e+03 2.26109375e+02]
TIMING : CubeSpectrum done [ 1.32880000e-02 1.33249760e-02 1.42675391e+03 2.26109375e+02]
TIMING : CubeSpectrum END [ 0.354126 0.37480712]
INFO : AT.py : BDP_OUT[0] = CubeSpectrum_BDP Genspec.csp
INFO :
INFO :
INFO : Executing LineSegment_AT - '' (V1.2.3)
INFO :
INFO :
INFO : Run using the following settings:
INFO : numsigma : 5.0
INFO : minchan : 4
INFO : edgechannels : 0
INFO : smooth : []
INFO : recalcnoise : False
INFO : maxgap : 3
INFO : csub : [0, None]
INFO : iterate : True
INFO : segment : ADMIT
INFO :
TIMING : LineSegment ADMIT [ 2.31040700e+00 1.64394024e+09]
TIMING : LineSegment BEGIN [ 0. 0.]
TIMING : LineSegment start [ 2.42000000e-02 2.42538452e-02 1.42675391e+03 2.26109375e+02]
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=5 maxgap=3 minchan=4
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.006204
DEBUG : ADMITSegmentFinder.py : Line in 6 channels 1230 - 1235 @ 110.3008 GHz +/- 0.0197 GHz log(S/N) = 0.13 FWHM 126.2 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1240 - 1243 @ 110.5268 GHz +/- 0.0328 GHz log(S/N) = 0.02 FWHM 209.3 km/s 0.02
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=6.66667 maxgap=3 minchan=3
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.008272
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1232 - 1235 @ 110.2923 GHz +/- 0.0408 GHz log(S/N) = 0.13 FWHM 261.3 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1240 - 1243 @ 110.5268 GHz +/- 0.0328 GHz log(S/N) = 0.02 FWHM 209.3 km/s 0.02
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=10 maxgap=3 minchan=2
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.012409
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1232 - 1235 @ 110.2923 GHz +/- 0.0408 GHz log(S/N) = 0.13 FWHM 261.3 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 2 channels 1242 - 1243 @ 110.5469 GHz +/- 0.0156 GHz log(S/N) = 0.02 FWHM 99.7 km/s 0.02
TIMING : LineSegment getspectrum [ 8.38621000e-01 8.40965033e-01 1.42675391e+03 2.26109375e+02]
INFO : LineSegment_AT.py : Detecting segments in CubeSpectrum based data
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=5 maxgap=3 minchan=4
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.006204
DEBUG : ADMITSegmentFinder.py : Line in 6 channels 1230 - 1235 @ 110.3008 GHz +/- 0.0197 GHz log(S/N) = 0.13 FWHM 126.2 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1240 - 1243 @ 110.5268 GHz +/- 0.0328 GHz log(S/N) = 0.02 FWHM 209.3 km/s 0.02
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=6.66667 maxgap=3 minchan=3
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.008272
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1232 - 1235 @ 110.2923 GHz +/- 0.0408 GHz log(S/N) = 0.13 FWHM 261.3 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1240 - 1243 @ 110.5268 GHz +/- 0.0328 GHz log(S/N) = 0.02 FWHM 209.3 km/s 0.02
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=10 maxgap=3 minchan=2
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.012409
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1232 - 1235 @ 110.2923 GHz +/- 0.0408 GHz log(S/N) = 0.13 FWHM 261.3 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 2 channels 1242 - 1243 @ 110.5469 GHz +/- 0.0156 GHz log(S/N) = 0.02 FWHM 99.7 km/s 0.02
WARNING : specutil.py : 0 [1230, 1235]
WARNING : specutil.py : 1 [1240, 1243]
TIMING : LineSegment segment finder [ 9.16512000e-01 9.19130087e-01 1.42675391e+03 2.26109375e+02]
INFO : LineSegment_AT.py : Segment Coverage 10 / 1297 = 0.0077101
REGRESSION : LINESEG: [[110.15703125, 110.31328125], [110.46953125, 110.56328125]]
TIMING : LineSegment done [ 7.08492000e-01 7.49291897e-01 1.47625000e+03 2.75472656e+02]
TIMING : LineSegment END [ 2.500181 2.54603982]
INFO : AT.py : BDP_OUT[0] = LineSegment_BDP Genspec.lseg
INFO :
INFO :
INFO : Executing LineID_AT - '' (V1.2.7)
INFO :
INFO :
INFO : Run using the following settings:
INFO : numsigma : 5.0
INFO : force : []
INFO : tier1width : 0.0
INFO : online : False
INFO : recomblevel : shallow
INFO : references : etc/co_lines.list
INFO : csub : [0, None]
INFO : identifylines : True
INFO : iterate : True
INFO : segment : ADMIT
INFO : allowexotics : False
INFO : minchan : 4
INFO : pattern : AUTO
INFO : edgechannels : 0
INFO : smooth : []
INFO : recalcnoise : False
INFO : vlsr : 12387.0
INFO : maxgap : 3
INFO : reject : []
INFO : method : {'PeakFinder': {'thresh': 0.0}}
INFO : mode : ONE
INFO :
TIMING : LineID ADMIT [ 4.87109200e+00 1.64394024e+09]
TIMING : LineID BEGIN [ 0. 0.]
INFO : LineID_AT.py : Identifylines = True
INFO : LineID_AT.py : Using vlsr = 12387
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=5 maxgap=3 minchan=4
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.006204
DEBUG : ADMITSegmentFinder.py : Line in 6 channels 1230 - 1235 @ 115.0547 GHz +/- 0.0206 GHz log(S/N) = 0.13 FWHM 126.2 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1240 - 1243 @ 115.2904 GHz +/- 0.0342 GHz log(S/N) = 0.02 FWHM 209.3 km/s 0.02
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=6.66667 maxgap=3 minchan=3
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.008272
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1232 - 1235 @ 115.0458 GHz +/- 0.0426 GHz log(S/N) = 0.13 FWHM 261.3 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1240 - 1243 @ 115.2904 GHz +/- 0.0342 GHz log(S/N) = 0.02 FWHM 209.3 km/s 0.02
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=10 maxgap=3 minchan=2
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.012409
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1232 - 1235 @ 115.0458 GHz +/- 0.0426 GHz log(S/N) = 0.13 FWHM 261.3 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 2 channels 1242 - 1243 @ 115.3114 GHz +/- 0.0163 GHz log(S/N) = 0.02 FWHM 99.7 km/s 0.02
TIMING : LineID getspectrum-cubespecs [ 9.11391000e-01 9.14138079e-01 1.47675000e+03 2.76042969e+02]
TIMING : LineID segment finder [ 1.29200000e-02 1.29668713e-02 1.47675000e+03 2.76042969e+02]
INFO : LineID_AT.py : Detecting segments in CubeSpectrum based data
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=5 maxgap=3 minchan=4
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.006204
DEBUG : ADMITSegmentFinder.py : Line in 6 channels 1230 - 1235 @ 115.0547 GHz +/- 0.0206 GHz log(S/N) = 0.13 FWHM 126.2 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1240 - 1243 @ 115.2904 GHz +/- 0.0342 GHz log(S/N) = 0.02 FWHM 209.3 km/s 0.02
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=6.66667 maxgap=3 minchan=3
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.008272
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1232 - 1235 @ 115.0458 GHz +/- 0.0426 GHz log(S/N) = 0.13 FWHM 261.3 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1240 - 1243 @ 115.2904 GHz +/- 0.0342 GHz log(S/N) = 0.02 FWHM 209.3 km/s 0.02
DEBUG : ADMITSegmentFinder.py : MIN/MAX -0.0418271320123 / 0.126017392116
DEBUG : ADMITSegmentFinder.py : ROBUST: (mean/median/noise) -6.40284578986e-06 / -3.34941260571e-05 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DIFF: (mean/stdev) 8.27268146907e-07 / 0.00674177541509
DEBUG : ADMITSegmentFinder.py : RDIFF: (mean/median/stdev) -5.06363132224e-06 / 1.19983091878e-05 / 0.00164249406544
DEBUG : ADMITSegmentFinder.py : CLASSIC MEAN/SIGMA: -6.40284578986e-06 / 0.00154734407974
DEBUG : ADMITSegmentFinder.py : DMIN/DMAX: -0.00409589852827 / 0.00171119313337
DEBUG : ADMITSegmentFinder.py : BETTER MEAN/SIGMA: 0.0 / 0.00124086485468
DEBUG : ADMITSegmentFinder.py : SEGMENTS: f=1.5 pmin=10 maxgap=3 minchan=2
DEBUG : ADMITSegmentFinder.py : Found 2 segments above cutoff 0.012409
DEBUG : ADMITSegmentFinder.py : Line in 4 channels 1232 - 1235 @ 115.0458 GHz +/- 0.0426 GHz log(S/N) = 0.13 FWHM 261.3 km/s 0.13
DEBUG : ADMITSegmentFinder.py : Line in 2 channels 1242 - 1243 @ 115.3114 GHz +/- 0.0163 GHz log(S/N) = 0.02 FWHM 99.7 km/s 0.02
WARNING : specutil.py : 0 [1230, 1235]
WARNING : specutil.py : 1 [1240, 1243]
INFO : LineID_AT.py : Searching for spectral peaks with method: PeakFinder
DEBUG : LineID_AT.py : Searching for spectral peaks specs 0
DEBUG : LineID_AT.py : merging all peaks for mode=ONE
INFO : LineID_AT.py : Found line: CH3COOHv=0 13(*,11)-13(*,12)+-v=0 @ 115.02887GHz, channels 1230 - 1235
REGRESSION : LINEID: CH3COOHv=0 115.02887 1230 1235
INFO : LineID_AT.py : Found line: CO 1-0 @ 115.2712GHz, channels 1240 - 1243
REGRESSION : LINEID: CO 115.27120 1240 1243
INFO : LineID_AT.py : Line Coverage 10 / 1297 = 0.0077101
TIMING : LineID done [ 3.787296 3.97446203 1561.96875 362.86328125]
TIMING : LineID END [ 4.726028 4.91602802]
INFO : AT.py : BDP_OUT[0] = LineList_BDP Genspec.ll