INFO : AT.py : Setting {'basename': 'x', 'file': 'W-Hya_93231_1.nf.fits'} for Ingest_AT
INFO : AT.py : Setting 'ppp' = True for CubeStats_AT
INFO : AT.py : Setting 'numsigma' = 4.0 for CubeSum_AT
INFO : AT.py : Setting 'sigma' = 99.0 for CubeSum_AT
INFO : AT.py : Setting 'numsigma' = 4.0 for SFind2D_AT
INFO : Admit.py : ADMIT run() called [flowcount 1]
INFO :
INFO :
INFO : Executing Ingest_AT - '' (V1.2.13)
INFO :
INFO :
INFO : Run using the following settings:
INFO : box : []
INFO : file : W-Hya_93231_1.nf.fits
INFO : smooth : []
INFO : basename : x
INFO : mask : True
INFO : pb :
INFO : edge : []
INFO : restfreq : -1.0
INFO : vlsr : -999999.9
INFO : usepb : True
INFO :
TIMING : Ingest ADMIT [ 2.27919000e+00 1.64394143e+09]
TIMING : Ingest BEGIN [ 0. 0.]
INFO : Ingest_AT.py : OBJECT: W-Hya SHAPE: [ 81 81 1297]
INFO : Ingest_AT.py : basename=x
INFO : utils.py : OSTYPE: linux
TIMING : Ingest start [ 2.31033000e-01 2.37842083e-01 1.41021875e+03 2.18527344e+02]
TIMING : Ingest importfits [ 1.62653000e-01 3.47731829e-01 1.41088672e+03 2.20367188e+02]
WARNING : Ingest_AT.py : Adding dummy STOKES-I axis
TIMING : Ingest adddegaxes [ 7.28130000e-02 9.33871269e-02 1.41658203e+03 2.26945312e+02]
TIMING : Ingest summary-0 [ 1.41590000e-02 1.42369270e-02 1.41658203e+03 2.26945312e+02]
TIMING : Ingest mask [ 5.67510000e-02 9.10539627e-02 1.41658203e+03 2.26945312e+02]
TIMING : Ingest summary-1 [ 1.41670000e-02 1.77860260e-02 1.41658203e+03 2.26945312e+02]
TIMING : Ingest statistics [ 4.38110000e-02 4.39281464e-02 1.41787891e+03 2.29351562e+02]
INFO : Ingest_AT.py : COMMONBEAM[3] {'major': {'value': 6.9000012, 'unit': 'arcsec'}, 'pa': {'value': 0.0, 'unit': 'deg'}, 'minor': {'value': 6.9000012, 'unit': 'arcsec'}}
INFO : Ingest_AT.py : BASICS: [shape] npts min max: [ 81 81 1297 1] 1007769 -1.302115 2.793284
INFO : Ingest_AT.py : S/N (all data): 17.264312
INFO : Ingest_AT.py : GOOD PIXELS: 1007769/8509617 (11.842707% good or 88.157293% bad)
WARNING : Ingest_AT.py : MASKS: ['mask0']
REGRESSION : CUBE: -1.30212 2.79328 0.161795 81 81 1297 88.157293
INFO : Ingest_AT.py : TELESCOPE: LMT
INFO : Ingest_AT.py : OBJECT: W-Hya
INFO : Ingest_AT.py : REFFREQTYPE: LSRK
INFO : Ingest_AT.py : RA Axis 1: 0.000000 -3.000000 40.000000
INFO : Ingest_AT.py : DEC Axis 2: 0.000000 3.000000 40.000000
INFO : Ingest_AT.py : VLSRv = 0.000000 (from source catalog)
INFO : Ingest_AT.py : VLSRz = 0.000000 +/- 0.000000 1 values: [ 0.]
INFO : Ingest_AT.py : Freq Orig Axis 3: 216.822 0.000390625 0
INFO : Ingest_AT.py : Cube Orig Axis 3: type=Frequency velocity increment=-0.539400 km/s @ fc=217.075032 fw=0.506641 GHz
INFO : Ingest_AT.py : RESTFREQ: 217.105 217.105 -1
INFO : Ingest_AT.py : VLSRc= 41.269735 VLSRf= 0.000000 VLSRv= 0.000000 VLSRz= 0.000000 WIDTH= -699.601930
INFO : Ingest_AT.py : VLSR = 41.269735 errs = 0.000000 0.000000 0.000000 width = -0.539400
TIMING : Ingest done [ 5.58216000e-01 5.74393988e-01 1.42087891e+03 2.32828125e+02]
TIMING : Ingest END [ 1.165793 1.432585]
INFO : AT.py : BDP_OUT[0] = SpwCube_BDP x.im
INFO :
INFO :
INFO : Executing CubeStats_AT - '' (V1.2.3)
INFO :
INFO :
INFO : Run using the following settings:
INFO : ppp : True
INFO : psample : -1
INFO : robust : []
INFO : maxvrms : 2.0
INFO :
TIMING : CubeStats ADMIT [ 3.50592200e+00 1.64394144e+09]
TIMING : CubeStats BEGIN [ 0. 0.]
TIMING : CubeStats imval [ 5.70700000e-02 5.73050976e-02 1.41962891e+03 2.32105469e+02]
TIMING : CubeStats start [ 1.24230000e-02 1.24650002e-02 1.41962891e+03 2.32105469e+02]
TIMING : CubeStats imstat0 [ 1.28517000e-01 1.28937006e-01 1.41819922e+03 2.31156250e+02]
TIMING : CubeStats imstat1 [ 2.71835000e-01 2.72630930e-01 1.44369141e+03 2.56828125e+02]
INFO : CubeStats_AT.py : sigma varies from 0.072551 to 0.253068; 1297/1297 channels ok
WARNING : CubeStats_AT.py : sigma varies too much, going to clip to 0.145102 (3.48815 > 2)
INFO : CubeStats_AT.py : Computing MaxPos for PeakPointPlot
TIMING : CubeStats ppp [ 1.49457 1.49974895 1443.69140625 256.828125 ]
INFO : CubeStats_AT.py : CubeMax: 2.793284 @ [ 41 49 647 0]
INFO : CubeStats_AT.py : CubeMin: -1.302115 @ [ 45 61 349 0]
INFO : CubeStats_AT.py : CubeRMS: 0.153910
INFO : CubeStats_AT.py : RMS Sanity check 1.051233
REGRESSION : CST: 0.153910 1.051233
INFO : CubeStats_AT.py : mean,rms,S/N=0.002103 0.153910 18.148814
INFO : CubeStats_AT.py : RMS BAD VARIATION RATIO: 0.844796 0.607838
TIMING : CubeStats plotting [ 2.294375 2.46824908 1460.8046875 272.2734375 ]
TIMING : CubeStats done [ 1.35260000e-02 1.35679245e-02 1.46080469e+03 2.72273438e+02]
TIMING : CubeStats summary [ 1.22850000e-02 1.23429298e-02 1.46080469e+03 2.72273438e+02]
TIMING : CubeStats END [ 4.296833 4.47751808]
INFO : AT.py : BDP_OUT[0] = CubeStats_BDP x.cst
INFO :
INFO :
INFO : Executing CubeSum_AT - '' (V1.2.2)
INFO :
INFO :
INFO : Run using the following settings:
INFO : linesum : True
INFO : numsigma : 4.0
INFO : zoom : 1
INFO : pad : 5
INFO : sigma : 99.0
INFO :
TIMING : CubeSum ADMIT [ 7.86290000e+00 1.64394144e+09]
TIMING : CubeSum BEGIN [ 0. 0.]
INFO : CubeSum_AT.py : Using constant sigma = 0.153910
TIMING : CubeSum start [ 5.18610000e-02 5.19962311e-02 1.46080469e+03 2.72273438e+02]
TIMING : CubeSum immoments [ 1.13174000e-01 3.56725931e-01 1.46080469e+03 2.72718750e+02]
TIMING : CubeSum statistics [ 2.01260000e-02 2.01928616e-02 1.46080469e+03 2.72718750e+02]
INFO : CubeSum_AT.py : Total flux: 1070.268538 (sum=118.918707)
REGRESSION : CSM: [1070.2685384556769, 118.91870746808127]
TIMING : CubeSum implot [ 1.44510000e-01 6.32609105e+00 1.53280859e+03 2.72753906e+02]
TIMING : CubeSum getdata [ 2.11530000e-02 2.12481022e-02 1.53280859e+03 2.72753906e+02]
TIMING : CubeSum done [ 2.37248000e-01 2.59058952e-01 1.53280859e+03 2.72820312e+02]
TIMING : CubeSum END [ 0.601635 7.04890704]
INFO : AT.py : BDP_OUT[0] = Moment_BDP x.csm
INFO :
INFO :
INFO : Executing SFind2D_AT - 'csm' (V1.2.2)
INFO :
INFO :
INFO : Run using the following settings:
INFO : nmax : 30
INFO : numsigma : 4.0
INFO : snmax : 35.0
INFO : region :
INFO : zoom : 1
INFO : robust : ['hin', 1.5]
INFO : sigma : -1.0
INFO :
TIMING : SFind2D ADMIT [ 8.52504000e+00 1.64394145e+09]
TIMING : SFind2D BEGIN [ 0. 0.]
TIMING : SFind2D start [ 3.38410000e-02 3.39500904e-02 1.53280859e+03 2.72820312e+02]
TIMING : SFind2D imstat [ 4.10380000e-02 4.12700176e-02 1.53280859e+03 2.72820312e+02]
INFO : AT.py : Setting 'sigma' = 0.693028210248 for SFind2D_AT
INFO : SFind2D_AT.py : sigma, dmin, dmax, snmax, cutoff 0.693028 -23.0254 22.7973 35 0.121599
WARNING : SFind2D_AT.py : Temporarely patching your K.km/s units to Jy/beam for ia.findsources()
TIMING : SFind2D findsources [ 9.03610000e-02 1.24484062e-01 1.53280859e+03 2.73054688e+02]
REGRESSION : CONTFLUX: 0 0
INFO : SFind2D_AT.py : Fitted Gaussian size; NOT deconvolved source size.
INFO : SFind2D_AT.py : Restoring Beam: Major axis: 6.9 arcsec , Minor axis: 6.9 arcsec , PA: 0.0 deg
TIMING : SFind2D done [ 2.65085000e-01 5.21945000e-01 1.53280859e+03 2.73054688e+02]
TIMING : SFind2D END [ 0.443823 0.73517704]
INFO : AT.py : BDP_OUT[0] = SourceList_BDP x-csm.sl
TIMING : ADMITrun END [ 7.130509 14.37807918]
INFO : Admit.py : ADMIT run() finished [flowcount 1] [cpu 7.13051 14.3781 ]
INFO : AT.py : Setting 'csub' = [0, 0] for LineSegment_AT
INFO : Admit.py : ADMIT run() called [flowcount 1]
INFO :
INFO :
INFO : Executing CubeSpectrum_AT - '' (V1.2.5)
INFO :
INFO :
INFO : Run using the following settings:
INFO : xaxis :
INFO : sources : [0]
INFO : pos : []
INFO :
TIMING : CubeSpectrum ADMIT [ 9.21846700e+00 1.64394145e+09]
TIMING : CubeSpectrum BEGIN [ 0. 0.]
INFO : CubeSpectrum_AT.py : CubeStats::maxpos,val=[41, 49, 647],2.793284
TIMING : CubeSpectrum CubeStats-pos [ 4.94440000e-02 4.95808125e-02 1.53280859e+03 2.73054688e+02]
INFO : CubeSpectrum_AT.py : CubeSum::maxpos,val=[41, 49],22.797255
TIMING : CubeSpectrum Moment-pos [ 4.24870000e-02 4.26161289e-02 1.53280859e+03 2.73054688e+02]
TIMING : CubeSpectrum open [ 1.22230000e-02 1.22568607e-02 1.53280859e+03 2.73054688e+02]
TIMING : CubeSpectrum imval [ 4.85460000e-02 4.87689972e-02 1.53280859e+03 2.73710938e+02]
TIMING : CubeSpectrum imhead [ 4.19810000e-02 4.21361923e-02 1.53280859e+03 2.73710938e+02]
REGRESSION : CSP: [2.7932837009429932]
INFO : CubeSpectrum_AT.py : Writing 1 testCubeSpectrum tables
TIMING : CubeSpectrum done [ 2.71639000e-01 2.90818930e-01 1.53280859e+03 2.73812500e+02]
TIMING : CubeSpectrum summary [ 1.24230000e-02 1.24549866e-02 1.53280859e+03 2.73812500e+02]
TIMING : CubeSpectrum END [ 0.490948 0.51087189]
INFO : AT.py : BDP_OUT[0] = CubeSpectrum_BDP x.csp
INFO :
INFO :
INFO : Executing LineSegment_AT - '' (V1.2.3)
INFO :
INFO :
INFO : Run using the following settings:
INFO : numsigma : 5.0
INFO : minchan : 4
INFO : edgechannels : 0
INFO : smooth : []
INFO : recalcnoise : False
INFO : maxgap : 3
INFO : csub : [0, 0]
INFO : iterate : True
INFO : segment : ADMIT
INFO :
TIMING : LineSegment ADMIT [ 9.76970600e+00 1.64394145e+09]
TIMING : LineSegment BEGIN [ 0. 0.]
TIMING : LineSegment start [ 2.43590000e-02 2.44231224e-02 1.53280859e+03 2.73812500e+02]
INFO : LineSegment_AT.py : Attempting Continuum Subtraction for Input Spectra
INFO : LineSegment_AT.py : Attempting Continuum Subtraction for Input CubeStats Spectra
TIMING : LineSegment getspectrum [ 9.818262 9.84149289 1532.80859375 274.296875 ]
INFO : LineSegment_AT.py : Detecting segments in CubeSpectrum based data
WARNING : specutil.py : 0 [638, 658]
INFO : LineSegment_AT.py : Detecting segments in CubeStats based data
WARNING : specutil.py : 0 [0, 3]
WARNING : specutil.py : 1 [640, 656]
WARNING : specutil.py : 0 [11, 15]
TIMING : LineSegment segment finder [ 2.378411 2.38396311 1532.80859375 274.296875 ]
INFO : LineSegment_AT.py : Segment Coverage 21 / 1297 = 0.0161912
REGRESSION : LINESEG: [[216.82190714567872, 216.82307902053972], [217.07190711603226, 217.07815711529111], [216.82620402016917, 216.8277665199839], [217.0711258661249, 217.07893836519847]]
TIMING : LineSegment done [ 1.659031 1.74770498 1558.94140625 300.4375 ]
TIMING : LineSegment END [ 13.892454 14.0100069]
INFO : AT.py : BDP_OUT[0] = LineSegment_BDP x.lseg
TIMING : ADMITrun END [ 21.788781 29.22366214]
INFO : Admit.py : ADMIT run() finished [flowcount 1] [cpu 21.7888 29.2237 ]
INFO : Admit.py : ADMIT run() called [flowcount 1]
TIMING : ADMITrun END [ 21.887422 29.3857491]
INFO : Admit.py : ADMIT run() finished [flowcount 1] [cpu 21.8874 29.3857 ]
INFO : AT.py : Setting 'csub' = [0, 0] for LineID_AT
INFO : AT.py : Setting 'references' = etc/tier1_lines.list for LineID_AT
INFO : Admit.py : ADMIT run() called [flowcount 1]
INFO :
INFO :
INFO : Executing LineID_AT - '' (V1.2.7)
INFO :
INFO :
INFO : Run using the following settings:
INFO : numsigma : 5.0
INFO : force : []
INFO : tier1width : 0.0
INFO : online : False
INFO : recomblevel : shallow
INFO : references : etc/tier1_lines.list
INFO : csub : [0, 0]
INFO : identifylines : True
INFO : iterate : True
INFO : segment : ADMIT
INFO : allowexotics : False
INFO : minchan : 4
INFO : pattern : AUTO
INFO : edgechannels : 0
INFO : smooth : []
INFO : recalcnoise : False
INFO : vlsr : -999999.99
INFO : maxgap : 3
INFO : reject : []
INFO : method : {'PeakFinder': {'thresh': 0.0}}
INFO : mode : ONE
INFO :
TIMING : LineID ADMIT [ 2.39943680e+01 1.64394146e+09]
TIMING : LineID BEGIN [ 0. 0.]
INFO : LineID_AT.py : Set vlsr = 41.27 for line identification.
INFO : LineID_AT.py : Identifylines = True
INFO : LineID_AT.py : Using vlsr = 41.2697
INFO : LineID_AT.py : Attempting Continuum Subtraction for Input Spectra
TIMING : LineID getspectrum-cubespecs [ 2.898401 2.90546608 1558.94140625 300.4375 ]
INFO : LineID_AT.py : Attempting Continuum Subtraction for Input CubeStats Spectra
TIMING : LineID getspectrum-cubestats [ 6.985593 7.00287294 1558.94140625 300.4375 ]
TIMING : LineID segment finder [ 1.40470000e-02 1.40869617e-02 1.55894141e+03 3.00437500e+02]
INFO : LineID_AT.py : Detecting segments in CubeSpectrum based data
WARNING : specutil.py : 0 [638, 658]
INFO : LineID_AT.py : Detecting segments in CubeStats based data
WARNING : specutil.py : 0 [0, 3]
WARNING : specutil.py : 1 [640, 656]
WARNING : specutil.py : 0 [11, 15]
INFO : LineID_AT.py : Searching for spectral peaks with method: PeakFinder
INFO : LineID_AT.py : Found line: CH3OHvt=0 6(3,3)-7(1,6) @ 216.85786GHz, channels 11 - 15
REGRESSION : LINEID: CH3OHvt=0 216.85786 11 15
INFO : LineID_AT.py : Found line: SiO 5-4 @ 217.10498GHz, channels 638 - 658
REGRESSION : LINEID: SiO 217.10498 638 658
INFO : LineID_AT.py : Line Coverage 26 / 1297 = 0.0200463
TIMING : LineID done [ 10.947401 11.09897304 1656.6796875 399.6171875 ]
TIMING : LineID END [ 20.862062 21.03805614]
INFO : AT.py : BDP_OUT[0] = LineList_BDP x.ll
TIMING : ADMITrun END [ 43.108745 50.85251403]
INFO : Admit.py : ADMIT run() finished [flowcount 1] [cpu 43.1087 50.8525 ]
INFO : Admit.py : ADMIT run() called [flowcount 1]
INFO :
INFO :
INFO : Executing LineCube_AT - '' (V1.2.2)
INFO :
INFO :
INFO : Run using the following settings:
INFO : equalize : False
INFO : pad : 5
INFO : fpad : -1.0
INFO :
TIMING : LineCube ADMIT [ 4.51676150e+01 1.64394149e+09]
TIMING : LineCube BEGIN [ 0. 0.]
TIMING : LineCube start [ 6.39930000e-02 6.42268658e-02 1.61018359e+03 3.53121094e+02]
TIMING : LineCube pad [ 1.35910000e-02 1.36289597e-02 1.61018359e+03 3.53121094e+02]
TIMING : LineCube trans-x.CH3OH_216.85786 [ 7.33380000e-02 3.66140127e-01 1.61018359e+03 3.53183594e+02]
TIMING : LineCube trans-x.SiO_217.10498 [ 7.32550000e-02 2.56161928e-01 1.61018359e+03 3.53183594e+02]
REGRESSION : LC: [6, 20, 633, 663]
TIMING : LineCube done [ 2.49330000e-02 2.49960423e-02 1.61018359e+03 3.53183594e+02]
TIMING : LineCube END [ 0.261497 0.73757505]
INFO : AT.py : BDP_OUT[0] = LineCube_BDP x.CH3OH_216.85786/lc.im
INFO : AT.py : BDP_OUT[1] = LineCube_BDP x.SiO_217.10498/lc.im
TIMING : ADMITrun END [ 43.567315 51.855124]
INFO : Admit.py : ADMIT run() finished [flowcount 1] [cpu 43.5673 51.8551 ]
INFO : AT.py : Setting 'moments' = [0, 1, 2] for Moment_AT
INFO : AT.py : Setting 'mom0clip' = 2.0 for Moment_AT
INFO : AT.py : Setting 'moments' = [0, 1, 2] for Moment_AT
INFO : AT.py : Setting 'mom0clip' = 2.0 for Moment_AT
INFO : AT.py : Setting 'numsigma' = [3.0] for Moment_AT
INFO : AT.py : Setting 'mom0clip' = 2.0 for Moment_AT
INFO : Admit.py : ADMIT run() called [flowcount 1]
INFO :
INFO :
INFO : Executing Moment_AT - '@2' (V1.2.2)
INFO :
INFO :
INFO : Run using the following settings:
INFO : numsigma : [3.0]
INFO : moments : [0]
INFO : mom0clip : 2.0
INFO : zoom : 1
INFO : chans :
INFO : sigma : -1.0
INFO :
TIMING : Moment ADMIT [ 4.57704050e+01 1.64394149e+09]
TIMING : Moment BEGIN [ 0. 0.]
TIMING : Moment open [ 4.89660000e-02 4.90858555e-02 1.61018359e+03 3.53183594e+02]
TIMING : Moment immoments-0 [ 1.21861000e-01 2.94600010e-01 1.62627734e+03 3.69277344e+02]
TIMING : Moment mom0clip [ 6.85290000e-02 1.42774105e-01 1.62627734e+03 3.69429688e+02]
TIMING : Moment implot [ 9.49370000e-02 3.40939999e-01 1.62627734e+03 3.69429688e+02]
TIMING : Moment getdata [ 2.08400000e-02 2.09069252e-02 1.62627734e+03 3.69429688e+02]
TIMING : Moment ren+mask_0 [ 3.44506000e-01 3.48875999e-01 1.62540625e+03 3.68558594e+02]
TIMING : Moment done [ 1.52720000e-02 1.53129101e-02 1.62540625e+03 3.68558594e+02]
TIMING : Moment END [ 0.727398 1.22504687]
INFO : AT.py : BDP_OUT[0] = Moment_BDP x-@2.mom_0
INFO :
INFO :
INFO : Executing Moment_AT - '' (V1.2.2)
INFO :
INFO :
INFO : Run using the following settings:
INFO : numsigma : [2.0]
INFO : moments : [0, 1, 2]
INFO : mom0clip : 2.0
INFO : zoom : 1
INFO : chans :
INFO : sigma : -1.0
INFO :
TIMING : Moment ADMIT [ 4.65587750e+01 1.64394149e+09]
TIMING : Moment BEGIN [ 0. 0.]
TIMING : Moment open [ 4.86390000e-02 4.87461090e-02 1.62540625e+03 3.68558594e+02]
TIMING : Moment immoments-all [ 6.77180000e-02 2.70128012e-01 1.62540625e+03 3.68558594e+02]
TIMING : Moment mom0clip [ 6.79890000e-02 1.24303818e-01 1.62540625e+03 3.68558594e+02]
TIMING : Moment implot [ 9.14520000e-02 3.44632149e-01 1.62540625e+03 3.68558594e+02]
TIMING : Moment getdata [ 2.05330000e-02 2.05938816e-02 1.62540625e+03 3.68558594e+02]
TIMING : Moment ren+mask_0 [ 2.61082000e-01 2.65087128e-01 1.62515625e+03 3.68308594e+02]
TIMING : Moment makemask [ 1.58294000e-01 4.40279961e-01 1.62515625e+03 3.69039062e+02]
TIMING : Moment implot [ 8.48330000e-02 3.23313951e-01 1.62515625e+03 3.69039062e+02]
TIMING : Moment getdata [ 2.02870000e-02 2.03559399e-02 1.62515625e+03 3.69039062e+02]
TIMING : Moment ren+mask_1 [ 2.58536000e-01 2.63028145e-01 1.62515625e+03 3.69039062e+02]
TIMING : Moment makemask [ 1.51006000e-01 4.37962055e-01 1.62515625e+03 3.69039062e+02]
TIMING : Moment implot [ 7.74020000e-02 3.04229975e-01 1.62515625e+03 3.69039062e+02]
TIMING : Moment getdata [ 2.03270000e-02 2.03909874e-02 1.62515625e+03 3.69039062e+02]
TIMING : Moment ren+mask_2 [ 2.53528000e-01 2.58113861e-01 1.62490625e+03 3.68789062e+02]
REGRESSION : MOM0FLUX: x.CH3OH_216.85786 -50.8494 30.8947 0.111111 42.8874 42.8874 0.149423
TIMING : Moment mom0flux [ 5.13540000e-02 5.14991283e-02 1.62490625e+03 3.68789062e+02]
TIMING : Moment flux-spectrum [ 2.60092000e-01 2.64658928e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment done [ 1.48030000e-02 1.48360729e-02 1.62440625e+03 3.68289062e+02]
TIMING : Moment END [ 1.920368 3.48472905]
INFO : AT.py : BDP_OUT[0] = Moment_BDP x.CH3OH_216.85786/lc.mom_0
INFO : AT.py : BDP_OUT[1] = Moment_BDP x.CH3OH_216.85786/lc.mom_1
INFO : AT.py : BDP_OUT[2] = Moment_BDP x.CH3OH_216.85786/lc.mom_2
INFO :
INFO :
INFO : Executing Moment_AT - '@1' (V1.2.2)
INFO :
INFO :
INFO : Run using the following settings:
INFO : numsigma : [2.0]
INFO : moments : [0, 1, 2]
INFO : mom0clip : 2.0
INFO : zoom : 1
INFO : chans :
INFO : sigma : -1.0
INFO :
TIMING : Moment ADMIT [ 4.85882230e+01 1.64394149e+09]
TIMING : Moment BEGIN [ 0. 0.]
TIMING : Moment open [ 4.86720000e-02 4.87918854e-02 1.62440625e+03 3.68289062e+02]
TIMING : Moment immoments-all [ 6.77670000e-02 3.62262011e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment mom0clip [ 6.83310000e-02 1.52738094e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment implot [ 9.46140000e-02 3.27538013e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment getdata [ 2.05040000e-02 2.05669403e-02 1.62440625e+03 3.68289062e+02]
TIMING : Moment ren+mask_0 [ 2.56615000e-01 2.61281013e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment makemask [ 1.49969000e-01 4.61493015e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment implot [ 7.66800000e-02 3.07370901e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment getdata [ 2.03810000e-02 2.07490921e-02 1.62440625e+03 3.68289062e+02]
TIMING : Moment ren+mask_1 [ 2.52651000e-01 2.58456945e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment makemask [ 1.52456000e-01 4.02076960e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment implot [ 8.17590000e-02 3.25792074e-01 1.62440625e+03 3.68289062e+02]
TIMING : Moment getdata [ 2.00720000e-02 2.01430321e-02 1.62440625e+03 3.68289062e+02]
TIMING : Moment ren+mask_2 [ 3.25605000e-01 3.32325935e-01 1.62440625e+03 3.68289062e+02]
REGRESSION : MOM0FLUX: x.SiO_217.10498 779.082 368.734 0.111111 42.2306 42.2306 0.70769
TIMING : Moment mom0flux [ 5.21050000e-02 5.22820950e-02 1.62440625e+03 3.68289062e+02]
TIMING : Moment flux-spectrum [ 3.13644000e-01 3.17504883e-01 1.62440625e+03 3.68292969e+02]
TIMING : Moment done [ 1.53720000e-02 1.54130459e-02 1.62440625e+03 3.68292969e+02]
TIMING : Moment END [ 2.029622 3.69926405]
INFO : AT.py : BDP_OUT[0] = Moment_BDP x.SiO_217.10498/lc-@1.mom_0
INFO : AT.py : BDP_OUT[1] = Moment_BDP x.SiO_217.10498/lc-@1.mom_1
INFO : AT.py : BDP_OUT[2] = Moment_BDP x.SiO_217.10498/lc-@1.mom_2
INFO :
INFO :
INFO : Executing CubeSpectrum_AT - '@1' (V1.2.5)
INFO :
INFO :
INFO : Run using the following settings:
INFO : xaxis :
INFO : sources : [0]
INFO : pos : []
INFO :
TIMING : CubeSpectrum ADMIT [ 5.07270010e+01 1.64394149e+09]
TIMING : CubeSpectrum BEGIN [ 0. 0.]
INFO : CubeSpectrum_AT.py : CubeSum::maxpos,val=[44, 64],7.636701
TIMING : CubeSpectrum Moment-pos [ 5.46410000e-02 5.47840595e-02 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum open [ 1.23140000e-02 1.23488903e-02 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum imval [ 3.64330000e-02 3.66261005e-02 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum imhead [ 4.27290000e-02 4.28740978e-02 1.62440625e+03 3.68292969e+02]
REGRESSION : CSP: [1.1552376747131348]
INFO : CubeSpectrum_AT.py : Writing 1 testCubeSpectrum tables
TIMING : CubeSpectrum done [ 3.04531000e-01 3.09169769e-01 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum summary [ 1.26210000e-02 1.26490593e-02 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum END [ 0.475637 0.48085403]
INFO : AT.py : BDP_OUT[0] = CubeSpectrum_BDP x.CH3OH_216.85786/lc-@1.csp
INFO :
INFO :
INFO : Executing CubeSpectrum_AT - '@2' (V1.2.5)
INFO :
INFO :
INFO : Run using the following settings:
INFO : xaxis :
INFO : sources : [0]
INFO : pos : []
INFO :
TIMING : CubeSpectrum ADMIT [ 5.12636950e+01 1.64394150e+09]
TIMING : CubeSpectrum BEGIN [ 0. 0.]
INFO : CubeSpectrum_AT.py : CubeSum::maxpos,val=[41, 49],23.909044
TIMING : CubeSpectrum Moment-pos [ 5.46020000e-02 5.47668934e-02 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum open [ 1.24550000e-02 1.25041008e-02 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum imval [ 3.59860000e-02 3.61559391e-02 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum imhead [ 4.22770000e-02 4.24349308e-02 1.62440625e+03 3.68292969e+02]
REGRESSION : CSP: [2.7932837009429932]
INFO : CubeSpectrum_AT.py : Writing 1 testCubeSpectrum tables
TIMING : CubeSpectrum done [ 3.02714000e-01 3.07562113e-01 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum summary [ 1.26630000e-02 1.26960278e-02 1.62440625e+03 3.68292969e+02]
TIMING : CubeSpectrum END [ 0.473084 0.47855687]
INFO : AT.py : BDP_OUT[0] = CubeSpectrum_BDP x.SiO_217.10498/lc-@2.csp