#include <carma/antenna/common/Varactor.h>

Inheritance diagram for carma::antenna::common::Varactor:

Public Member Functions
void	enableGunn (bool on) const
	Turn the gunn oscillator on or off. More...

void	enableIFmonitor (bool on) const
	Turn the IF monitor on or off. More...

void	enableSweep (bool on) const
	Turn the sweep on or off. More...

carma::canbus::MsgIdInfoMap	getHalfSecMonitors () const
	Retrieve a map of this devices half second monitor points. More...

carma::canbus::MsgIdInfoMap	getSlowMonitors () const
	Retrieve a map of this devices slow (5 second) monitor points. More...

void	processMsg (::carma::canbus::msgType mid,::carma::canbus::DataVector &data, bool sim)
	Process a CAN message addressed to this module. More...

void	setDummyLoFreq (float freqInGHz)
	Set dummy LO Frequency. More...

void	setLoopGainResistance (unsigned short resistanceInOhms) const
	Set the PLL loop gain resistance (controlled by a digital pot). More...

carma::canbus::Message	simulateMsg (carma::canbus::msgType mid)
	Produce a simulated CAN message for a given msgType. More...

void	updateFrameData ()
	Update Frame Data. More...

	Varactor (carma::canbus::nodeType node, carma::canbus::CanOutput &co, carma::monitor::VaractorModule &varMon, carma::monitor::Xac &xacMon, carma::monitor::StateMonitorPointEnum &stateMon)
	Constructor. More...

virtual	~Varactor ()
	Destructor. More...

Public Member Functions inherited from carma::canbus::devices::XacDevice
bool	isOnline ()
	Is Device ONLINE? More...

void	reset ()
	Reset the can module via CORBA using Device::softReset() method. More...

virtual void	setState (deviceStateType state)
	Set the state of the device. More...

void	startChannelOneFastSampling (unsigned short fastItem)
	Start fast sampling on channel one with the requested data item. More...

void	startChannelTwoFastSampling (unsigned short fastItem)
	Start fast sampling on channel two with the requested data item. More...

void	stopChannelOneFastSampling ()
	Stop fast sampling on channel one. More...

void	stopChannelTwoFastSampling ()
	Stop fast sampling on channel two. More...

	XacDevice (carma::canbus::apiType api, carma::canbus::nodeType node, carma::canbus::CanOutput &canOutput)
	Constructor. More...

virtual	~XacDevice ()
	Destructor. More...

Public Member Functions inherited from carma::canbus::Device
carma::canbus::Message	createDummyMsg () const
	Create a dummy CAN message. More...

carma::canbus::Message	createMsgToAllNodes (msgType messageId) const
	Create a CAN message addressed to all nodes of this type. More...

carma::canbus::Message	createMsgToHost (msgType messageId) const
	Create a CAN message addressed from this Device to the host. More...

carma::canbus::Message	createMsgToNode (msgType messageId) const
	Create a CAN message addressed to this device from the host. More...

	Device (apiType api, nodeType node, CanOutput &io)
	Device constructor. More...

apiType	getApi () const
	Return api code of device. More...

char	getApiVersion () const
	Get API Version of this Device. More...

boardType	getBoardType () const
	Return board type id of device. More...

busIdType	getBusId () const
	Return bus Id that node resides on. More...

virtual MsgIdInfoMap	getControls () const
	Return a map of devices controls. More...

keyType	getKey () const
	Create a key unique to this api and node. More...

double	getLastRxTime () const
	Get Last RX Time for device. More...

unsigned int	getNlatePackets () const
	Get number of late packets. More...

nodeType	getNode () const
	Return node location code of device. More...

serialNumberType	getSerialNumber () const
	Return serial number of device. More...

deviceStateType	getState () const
	Status access routine. More...

virtual void	processMsg (msgType messageId, std::vector< byteType > &data, bool sim)=0
	Process a CAN message. More...

void	reset ()
	Perform a software reset of module. More...

void	setBoardType (boardType bt)
	Set board type of device. More...

void	setBusId (busIdType busId)
	Set busId of device. More...

virtual void	setLastRxTime (double rxMjd)
	Set latest rx time. More...

void	setSerialNumber (serialNumberType sn)
	Set serial number of device. More...

void	startChannelOneFastSampling (unsigned short fastItem)
	Start fast sampling the specified data item on channel 1. More...

void	startChannelTwoFastSampling (unsigned short fastItem)
	Start fast sampling the specified data item on channel 2. More...

void	stopChannelOneFastSampling ()
	Stop fast sampling on channel 1 This routine will stop fast sampling on channel 1 regardless of whether this node is fast sampling the channel or not! In other words the request goes out globally. More...

void	stopChannelTwoFastSampling ()
	Stop fast sampling on channel 2 This routine will stop fast sampling on channel 2 regardless of whether this node is fast sampling the channel or not! In other words the request goes out globally. More...

virtual	~Device ()
	Device destructor. More...

Additional Inherited Members
Static Public Member Functions inherited from carma::canbus::Device
static keyType	createKey (apiType api, nodeType node)

Static Public Attributes inherited from carma::canbus::devices::XacDevice
static const carma::canbus::msgType	SYSTEM_MONITOR_PACKET_1 = 0x120

static const carma::canbus::msgType	SYSTEM_MONITOR_PACKET_2 = 0x121

static const carma::canbus::msgType	SYSTEM_MONITOR_PACKET_3 = 0x122

static const carma::canbus::msgType	SYSTEM_MONITOR_PACKET_4 = 0x123

static const carma::canbus::msgType	SYSTEM_MONITOR_PACKET_5 = 0x124

Protected Member Functions inherited from carma::canbus::devices::XacDevice
virtual void	initialize ()
	Initialization hook. More...

void	processSystemMonitorPacket (carma::canbus::msgType mid, carma::canbus::DataVector &data, carma::monitor::Xac &xac)
	Process a system monitor packet. More...

void	processSystemMonitorPacket1 (carma::canbus::DataVector &data, carma::monitor::Xac &xac)
	Process System Monitor Packet 1 This routine processes standard system monitor packet 1 and places the data into the input Xac reference. More...

void	processSystemMonitorPacket2 (carma::canbus::DataVector &data, carma::monitor::Xac &xac)
	Process System Monitor Packet 2. More...

void	processSystemMonitorPacket3 (carma::canbus::DataVector &data, carma::monitor::Xac &xac)
	Process System Monitor Packet 3. More...

void	processSystemMonitorPacket4 (carma::canbus::DataVector &data, carma::monitor::Xac &xac)
	Process System Monitor Packet 4. More...

void	processSystemMonitorPacket5 (carma::canbus::DataVector &data, carma::monitor::Xac &xac)
	Process System Monitor Packet 5. More...

carma::canbus::Message	simSystemMonitorPacket (carma::canbus::msgType mid)
	Simulate system monitor packet. More...

carma::canbus::Message	simSystemMonitorPacket1 ()
	Simulate System Monitor Packet 1. More...

carma::canbus::Message	simSystemMonitorPacket2 ()
	Simulate System Monitor Packet 2. More...

carma::canbus::Message	simSystemMonitorPacket3 ()
	Simulate System Monitor Packet 3. More...

carma::canbus::Message	simSystemMonitorPacket4 ()
	Simulate System Monitor Packet 4. More...

carma::canbus::Message	simSystemMonitorPacket5 ()
	Simulate System Monitor Packet 5. More...

Protected Member Functions inherited from carma::canbus::Device
void	incrementLatePacketCount ()
	Increment the late packet count by 1. More...

bool	isPacketLate (double window=100.0)
	Determine if the last packet sent from this device was late. More...

void	resetLatePacketCount ()
	Reset the late packet count to 0. More...

void	setApiVersion (char api)
	Set API Version. More...

Static Protected Member Functions inherited from carma::canbus::devices::XacDevice
static bool	isSystemMonitorPacket (carma::canbus::msgType)
	Check that input message type is a system monitor packet. More...

Protected Attributes inherited from carma::canbus::Device
const apiType	api_

CanOutput &	io_
	Reference to CanOutput object. More...

const keyType	key_

const nodeType	node_

Static Protected Attributes inherited from carma::canbus::Device
static const msgType	RESET = 0x0000
	Software reset message id. More...

static const msgType	START_CHANNEL_1_FAST_SAMPLING = 0x0004
	Begin channel 1 fast sampling message id. More...

static const msgType	START_CHANNEL_2_FAST_SAMPLING = 0x0005
	Begin channel 2 fast sampling message id. More...

static const msgType	STOP_CHANNEL_1_FAST_SAMPLING = 0x0002
	Stop channel 1 fast sampling message id. More...

static const msgType	STOP_CHANNEL_2_FAST_SAMPLING = 0x0003

Detailed Description

Varactor CAN device class.

Definition at line 30 of file Varactor.h.

Constructor & Destructor Documentation

carma::antenna::common::Varactor::Varactor	(	carma::canbus::nodeType	node,
		carma::canbus::CanOutput &	co,
		carma::monitor::VaractorModule &	varMon,
		carma::monitor::Xac &	xacMon,
		carma::monitor::StateMonitorPointEnum &	stateMon
	)

Constructor.

Parameters

node	Location id of this instance (node location id).
co	Reference to CanOutput class.
varMon	Reference to Varactor monitor instance.
xacMon	Reference to Xac monitor instance.
stateMon	Reference to StateMonitorPointEnum monitor instance.

virtual carma::antenna::common::Varactor::~Varactor ( )

virtual

Destructor.

Member Function Documentation

void carma::antenna::common::Varactor::enableGunn ( bool on ) const

Turn the gunn oscillator on or off.

Parameters

on	Turn gunn on if true, off otherwise.

void carma::antenna::common::Varactor::enableIFmonitor ( bool on ) const

Turn the IF monitor on or off.

Parameters

on	Turn IF monitor on if true, off otherwise.

void carma::antenna::common::Varactor::enableSweep ( bool on ) const

Turn the sweep on or off.

Parameters

on	Turn sweep on if true, off otherwise.

carma::canbus::MsgIdInfoMap carma::antenna::common::Varactor::getHalfSecMonitors ( ) const

virtual

Retrieve a map of this devices half second monitor points.

Returns: Map with string descriptions of the devices frame rate monitor points (half second) keyed by message id.

See Also: carma::canbus::Device::getHalfSecMonitors

Implements carma::canbus::Device.

carma::canbus::MsgIdInfoMap carma::antenna::common::Varactor::getSlowMonitors ( ) const

virtual

Retrieve a map of this devices slow (5 second) monitor points.

Returns: MsgIdInfoMap containing a string description of the device's slow monitor points keyed by message id.

See Also: carma::canbus::Device::getSlowMonitors

Reimplemented from carma::canbus::devices::XacDevice.

void carma::antenna::common::Varactor::processMsg	(	::carma::canbus::msgType	mid,
		::carma::canbus::DataVector &	data,
		bool	sim
	)

Process a CAN message addressed to this module.

Parameters

mid	Message identifier.
data	Reference to the byte vector containing raw CAN data.
sim	True if message is simulated, false normally.

See Also: carma::canbus::Device::processMsg

void carma::antenna::common::Varactor::setDummyLoFreq ( float freqInGHz )

Set dummy LO Frequency.

The frequency is not used for anything other than to pass down the monitor stream. This is to assure consistency with Gunn modules and antenna common MPs.

Parameters

freq in GHz.

void carma::antenna::common::Varactor::setLoopGainResistance ( unsigned short resistanceInOhms ) const

Set the PLL loop gain resistance (controlled by a digital pot).

Parameters

resistance Loop gain resistance in ohms.

carma::canbus::Message carma::antenna::common::Varactor::simulateMsg ( carma::canbus::msgType mid )

virtual

Produce a simulated CAN message for a given msgType.

Parameters